Replacement
|
1. | Remove the front bumper. (Refer to the BD group - "Front Bumper") |
2. | Loosen the mud guard mounting
screws.
|
3. | After loosening the mounting
screws and clips, then remove the side sill molding (A).
|
4. | After loosening the mounting
screw and bolt, then remove the front bumper side mounting bracket (A).
|
5. | After loosening the fender mounting
bolts, then remove the fender (A).
|
6. | Installation is the reverse of removal. |
Bulb wattage
...
Air Bag System Components
The main components of your SRS are:
An air bag in the steering wheel.
A second air bag in the passenger’s side dashboard.
A diagnostic system that continually monitors system operation.
An ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...