To erase the three HomeLink buttons, press and hold the two outside buttons until the indicator light begins to flash (after 20 seconds). Release both buttons.
Individual buttons cannot be erased, but can be reprogrammed.
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls
are prohibited in case of ABS failure.
2.
When ESC or TCS fails, only the
failed system control is prohibited ...
Schematic Diagrams
Circuit Diagram
...
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes.
3.
Install the seat belt ...