Remove
1. | Turn ignition OFF and disconnect the negative (-) battery cable. |
2. | Remove the floor console upper
cover. (Refer to Body group - "Console") |
3. | Remove the EPB switch assembly
after loosening the screws.
|
4. | Installation is the reverse of removal. |
Jump starting
Jump starting can be dangerous if done
incorrectly. Therefore, to avoid harm to
yourself or damage to your vehicle or
battery, follow these jump starting procedures.
If in doubt, we strongly r ...
Recommended SAE viscosity
number
CAUTION
Always be sure to clean the area
around any filler plug, drain plug, or
dipstick before checking or draining
any lubricant. This is especially
important in dusty or sandy areas
and ...
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front seat. The purpose
of the air bag is to provide the vehicle's driver and/or the front passenger with
additional protection ...