The electrical resistance of the ECTS decreases as the temperature increases, and increases as the temperature decreases. The reference +5V is supplied to the ECTS via a resistor in the ECM. That is, the resistor in the ECM and the thermistor in the ECTS are connected in series. When the resistance value of the thermistor in the ECTS changes according to the engine coolant temperature, the output voltage also changes.
During cold engine operation, the ECM increases the fuel injection duration and controls the ignition timing using the information of engine coolant temperature to avoid engine stalling and improve drivability.Room lamp
Type A
Type B
Type B
DOOR : In the DOOR position, the map lamp and the room lamp come on when
any door is opened regardless of the ignition switch position. When doors are
unlocked by ...
Removal
•
Take care not to scratch
the center fascia panel and related parts.
•
Eject all the ...
Inspection
1.
The rear glass defogger switch
inputs can be checked using the GDS.
2.
To check the input value of rear
glass defogger switch, select option "Body Control Mod ...