1.Take the cover out by putting the driver or key at left side.
2.Pull the
hook of cable.
3. After use, securely close the cover.
CAUTION
License Plate Light Bulb Replacement
1. Using a Phillips screwdriver, remove the two (2) lens mounting screws and
the lens.
2. Rotate socket one-quarter turn counterclockwise and carefully pull the socket
from the housing.
3. Car ...
Removal
The side airbag cannot be disassembled from the seat back assembly, so replace
the seat back assembly when replacing the side airbag. ...
One-Touch Wipers
For a single wiping cycle, push the lever forward and release it with the lever
in the OFF position.
The wipers will operate continuously if the lever is pushed forward and held.
✽ NOTICE ...