Kia Optima: Driveshaft Assembly

Reassembly

1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) Lay a new hub bearing upon the k ...

Front Driveshaft. Components and Components Location

...

See also:

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel.(Refer to the BD group - "Crash pad") 3. Rem ...

Checking the brake/clutch* fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/c ...

Rail Pressure Sensor (RPS). Schematic Diagrams
Circuit Diagram ...