WARNING
Prior to working on the Dome Light, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently pry the lens from the dome light housing.
2. Carefully pull the bulb out of the socket.
3. Insert a new bulb in the socket.
4. Align the lens tabs with the dome light housing notches and snap the lens into
place.
Variable Intermittent Wipers
Set the lever to the INT position and choose the desired wiper interval by turning
the ring. ...
Lumbar support
The lumbar support can be adjusted by pressing the lumbar support switch on the
side of the drivers seat. Press the front portion of the switch to increase support,
or the rear portion of the sw ...
Schematic Diagrams
Circuit Diaram
...