Kia Optima: Disassembly
|
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they are
removed so that each item can be reinstalled in its original position. |
| 1. |
Remove the MLAs (A).
|
| 2. |
Remove the valves.
| (1) |
Using SST (09222-3K000,
09222-3K100), compress the valve spring and remove retainer lock.
|
| (2) |
Remove the spring retainer. |
| (3) |
Remove the valve spring. |
| (5) |
Using needle-nose pliers,
remove the valve stem seal.
|
Do not reuse old valve stem seals. |
|
|
•
Use fender covers to
avoid damaging painted surfaces.
•
To avoid damaging the
...
Cylinder Head
1.
Inspect for flatness.Using
a precision straight edge and feeler gauge, measure the surface the contacting
the cylinder block and the manifolds for warpage.
...
See also:
Engine compartment fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Check the removed fuse; replace it if it
is blow ...
Rear safety belts
Two kinds of belts are provided:
Lap/shoulder belts for people who sit on the outboard sides of the rear
seat.
A lap belt for people who sit in the center of the rear seat.
Rear Lap/Should ...
Specifications
Item
Specifications
Transmission type
A6LF2
Engine model
Gasoline 2.0 T-GDI
Torque converter type
...
Removal
Inspection