Kia Optima: Disassembly
| - |
Do not work in a dusty
or dirty place. |
| - |
Do not touch the circuit
board with your bare hands. |
| - |
Do not touch the terminal
connector of the flat plate cable with your bare hands. (If you
have touched it, wipe it off thoroughly with a soft cloth) |
| - |
If the CD-rom needs to
BE removed, follow the procedure below. |
|
| 1. |
If necessary, separate the CD
Rom drive by removing the brackets (A) after loosening the screws (8EA).
|
| 2. |
Remove the screws (4EA) on the
head unit, and then disassemble the top cover (A).
|
| 3. |
Remove the front panel (A) on
the head unit after loosening the screws (2EA).
|
Take care not to damage the cable when removing the front panel. |
|
| 4. |
Remove the screws (4EA).
|
| 5. |
Remove the CD rom drive (A).
|
•
Take care not to scratch
the center fascia panel and related parts.
•
Eject all the ...
1.
Reassemble the CD-rom drive to
the audio unit.
2.
Reassemble the top cover and
front panel.
...
See also:
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which tur ...
Seat Heater (Non-Air Ventilation). Repair procedures
Inspection
First Seat Heater
1.
Check for continuity and measure
the resistance between No.4 and No.6 terminals.[Cushion]
No.
Description ...
Checking Brake/Clutch Fluid Level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN indicators on the side of the reservoir.
Before removing the reservoir cap and adding brake flui ...
Removal
Reassembly