Kia Optima: Dimensions Projected
| 1. | These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body alterations. |
| 2. | If the length of the tracking
gauge probes is adjustable, measure it by lengthening one of two probes
as long as the different value in height of the two surface.
|
Measuring Body Dimensions
1.
Basically, all measurements
in this manual are taken with a tracking gauge.
2.
When a measuring tape is
used, check to be sure there is no elongation, twis ...
Measuring Actual Dimensions
1.
These dimensions indicate
the actual linear distance between measurement points, and are used as the
reference dimensions when a tracking gauge is used for measurement.
...
See also:
Valve Body. Description and Operation
Description
The valve body is essential to automatic transaxle control and consists of various
valves used to control the oil feed from the oil pump. Specifically, these valves
consist of pressur ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the crankshaft position sensor connector
(A).
...
Yaw-rate and Lateral G Sensor. Description and Operation
Description
When the vehicle is turning with respect to a vertical axis the yaw rate sensor
detects the yaw rate electronically by the vibration change of plate fork inside
the yaw rate sensor.If ...
Copyright © www.kiopman.com 2024