Kia Optima: Description
and Operation
Description
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.
|
1.Solenoid 2.Brush assembly 3.Armature 4.Overrun clutch |
Starting System
...
Repair
procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the fuel ...
See also:
Adjustment
1.
Check that the waste gate turbo charger is cool enough
to work.
2.
Turn the ignition switch to OFF position.
3.
Connect the diagnosti ...
Manual Climate Control System
...
Rear Hub - Carrier. Components and Components Location
Components
1. Rear carrier assembly
2. Parking brake assembly
3. Rear hub assembly
4. Rear brake disc
...