Kia Optima: Description and Operation
Description
Tread Lamp
| - |
Tire Under Inflation / Leak Warning.
|
| 1. |
Turn on condition
| A. |
When tire pressure is
below allowed threshold |
|
| 2. |
Turn off condition
| A. |
When tire pressure is
above(warning threshold + hysteresis). |
| B. |
When tire pressure leakage
is less than 3 psi per min. |
|
DTC Warning
| 1. |
Turn on condition
| A. |
When the system detects
a fault that is external to the receiver / initator / sensor. |
| B. |
When the system detects
a receiver fault. |
| C. |
When the system detects
a sensor fault. |
|
System Fault
| 1. |
General Function
| A. |
The system monitors a
number of inputs across time in order to determine that a fault
exists. |
| B. |
Faults are prioritized
according to which has the most likely cause. |
| C. |
Certain faults are not
covered through DTC. The main ones are: |
| 1) |
Receiver Micro-controller
lock up ; requires observation of lamps at Ignition ON to
diagnose. |
| 2) |
Ignition Line
stuck ; requires observation of lamps at Ignition ON to
diagnose. |
|
|
Components Location
1. Receiver
2. TPMS sensor (FL)
3. TPMS sensor (RL)
4. TPMS sensor (RR)
5. TPMS sensor (FR)
...
Description
1.
Mode
(1)
Configuration State
A.
All sensors should
be in the Low Line state.
B.
In Low ...
See also:
Key operations
Type A
Type B
Type A
Used to start the engine, lock and unlock the doors.
Type B
To remove the mechanical key, press and hold the release button and remove the
mechanical key.
To reinstall ...
Inspection
Room Lamp
1.
Check that the switch operates
properly after disconnecting the room lamp connector (A).
[A type]
[B type]
...
Child seat anchorage position
For small children and babies, the use of a child seat or infant seat is strongly
recommended. This child seat or infant seat should be of appropriate size for the
child and should be installed in ...
Components and Components Location
TPMS Sensor. Description and Operation