Kia Optima: Description
According to driving environment and loading state of vehicle, head lamp lighting
direction is changed to keep the driver's visibility range and to protect the driver's
vision from glare, aiming at safety driving.
Sensor integrated ECU mounting on the rear center arm drives the actuator mounting
on the head lamp since sensing the input signal following the vehicle's statically
changes.
Head lamp beam is automatically operated by chassis tilt.
Operation
Operating Procedure
1.
Suspension angle change resulted
from vehicle's load change.
2.
Sensor angle change.
3.
Microprocessor calculates necessary
...
See also:
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [CHTG-AG]
Pin
No.
Description
Connected to
1
Ignition Coil (Cylinder #2) control output [W ...
Seat Belt Pretensioner (BPT). Components and Components Location
Components
...
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Loosen the mounting bolts and
then remove the under cover (A).
3.
Disconnect the connector ...