Kia Optima: Cylinder Head. Components and Components Location
|
1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly |
7. Exhaust camshaft upper bearing 8. Exhaust camshaft lower bearing 9. MLA 10. Retainer lock 11. Retainer 12. Valve spring |
13. Valve stem seal 14. Valve 15. Cylinder head 16. Cylinder head gasket 17. Fuel pump bracket |
Reassembly
1.
Reassemble the CVVT assembly
(A) and camshaft (B).
Tightening torque :53.9
~ 63.7N.m (5.5 ~ 6.5kgf.m, 39.7 ~ 47.0lb-ft)
...
See also:
Seat warmer (if equipped)
The seat warmer is provided to warm the rear seats during cold weather. With
the ignition switch in the ON position, push either of the switches to warm the
seat. During mild weather or under co ...
Adjusting the height of front seat cushion
To change the height (front portion) of the seat cushion, rotate the knob located
on the outside of the seat cushion.
To lower the seat cushion, rotate the knob toward the front of the vehicle ...
Owner maintenance schedule
When you stop for fuel:
Check the engine oil level.
Check the coolant level in coolant
reservoir.
Check the windshield washer fluid
level.
Look for low or under-inflated tires.
Whil ...
Copyright © www.kiopman.com 2024