The cruise control system allows you to program the vehicle to maintain a constant speed without resting your foot on the accelerator pedal.
With cruise control, you can set and automatically maintain any speed of more than about 25 mph (40 km/h).
WARNING - Cruise Control
Do not use the cruise control feature under the following conditions:
To set cruise control speed:
1. Push in the cruise control main switch. This turns the system on.
2. Accelerate to desired cruising speed above 25 mph (40 km/h).
3. Push the “COAST/SET” control switch and release it. The "CRUISE" indicator light in the instrument cluster will illuminate after you have set the vehicle speed at the desired speed.
4. Remove your foot from the accelerator pedal and the desired speed will automatically be maintained.
5. To increase speed, temporarily depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you remove your foot from the accelerator pedal, the vehicle will return to the speed you have set.
To cancel the cruise speed
Do one of the following:
Intake Air Temperature Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and
4.
...
Crash Pad. Repair procedures
Replacement
Cluster Replacement
•
When prying with a flat-tip
screwdriver, wrap it with protective tape, and apply ...
Intake Manifold. Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative
terminal (A).
Tightening torque4.0 ~
6.0N.m (0.4 ~ 0.6kgf.m, 3. ...