Kia Optima: Crash Pad. Components and Components Location
Components
|
1. Main crash pad assembly 2. Side speaker grille [LH] 3. Airbag blanking cover 4. Side speaker grille [RH] 5. Center speaker grille 6. Crash pad side cover [LH] 7. Side air vent duct [LH] |
8. Center facia lower panel 9. Crash pad garnish [LH] 10. Cluster fascia panel 11. Crash pad lower panel 12. Reinforcing panel 13. Center facia upper panel 14. Glove box |
15. Glove box housing 16. Crash pad garnish [RH] 17. Side air vent duct [RH] 18. Crash pad side cover [RH] 19. Cowl cross bar assembly |
Console. Repair procedures
Replacement
Floor Console Replacement
[M/T]
•
When prying with a flat-tip
screwdriver, wrap it with p ...
Crash Pad. Repair procedures
Replacement
Cluster Replacement
•
When prying with a flat-tip
screwdriver, wrap it with protective tape, and apply ...
See also:
Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from
the control switch.
2.
Measure resistance between terminals on the con ...
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet
its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58k ...
MAX A/C MODE
When you select the MAX A/C mode (switch indicator illuminates) while the fan
speed is on, it will be set the system automatically as follows;
- the air conditioning system will be turned on.
- ...
Copyright © www.kiopman.com 2024