Kia Optima: Child restraint system - Safety features of your vehicle - Kia Optima TF 2011-2024 Owners ManualKia Optima: Child restraint system

Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics, children are safer when properly restrained in the rear seats than in the front seat. Larger children not in a child restraint should use one of the seat belts provided.

You should be aware of the specific requirements in your country. Child and/or infant safety seats must be properly placed and installed in the rear seat.You must use a commercially available child restraint system that meets the requirements of the safety standards of your country.

Child restraint systems are designed to be secured in vehicle seats by seat belt, or by a tether anchor and/or LATCH anchors (if equipped).

Children could be injured or killed in a crash if their restraints are not properly secured. For small children and babies, a child seat or infant seat must be used. Before buying a particular child restraint system, make sure it fits your vehicle seat and seat belts, and fits your child. Follow all the instructions provided by the manufacturer when installing the child restraint system.

WARNING

To reduce the chance or serious or fatal injuries: WARNING

To reduce the chance or serious or fatal injuries:

When to replace seat belts
The entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concer ...

Using a child restraint system
Rearward-facing child restraint system Forward-facing child restraint system For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat s ...

See also:

Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it A→B→C→D order. Tightening torque :20.0~32.9N.m (2.04~3.36kgf.m, 14.7~24 ...

Valve Body. Description and Operation
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressur ...

Fuel Pressure Control Valve. Description and Operation
Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on var ...

Copyright © www.kiopman.com 2024