Your vehicle is equipped with an anchor for securing the tether strap of a child restraint system (child seat).
The child restraint anchor fittings are installed on the shelf behind the rear seat.
WARNING
If the tether strap is clipped incorrectly, the child restraint seat may not be restrained properly in the event of a collision.
Installing a child restraint seat ;
1. Position the child restraint seat on the rear passenger seat cushion.
2. Route the child restraint seat tether strap over the back of the seat.
For vehicles with adjustable head restraints, route the tether strap under the head
restraint and between the head restraint posts, otherwise route the tether strap
over the top of the seatback.
3. Locate the correct anchor on the package tray behind the rear seat for the selected seating position.
4. Open the tether anchor cover.
5. Clip the tether strap hook to the tether strap hook holder.
6. Tighten the tether strap to secure the seat.
WARNING - Child Restraint
Check that the child restraint system is secure by pushing and pulling it in different directions. Incorrectly fitted child restraints may swing, twist, tip or come away causing death or injury.
WARNING - Child Restraint Anchorage
Cleaning the Interior Window Glass
If the interior glass surfaces of the vehicle become fogged (that is, covered
with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow
the directions on the glass clea ...
Components and Components Location
Component Location
1. Hood switch
2. Burglar horn
3. BCM and RF antenna
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
...
26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable
force solenoid valve directly controls the hydraulic pressure inside the 26 brake.
...