Kia Optima: Check Fuses
A blade type fuse test taps provided to allow checking the fuse itself without removing if from the fuse box. The fuse is good if the test lamp lights up when one lead is connected to the test taps (one at a time) and the other lead is grounded. (Turn the ignition switch so that the fuse circuit becomes operative)
Checking Cables And Wires
1.
Check the terminal for
tightness.
2.
Check terminals and wires
for corrosion from battery electrolyte, etc.
3.
Check terminals and wire ...
Servicing The Electrical System
1.
Prior to servicing the
electrical system, be sure to turn off the ignition switch and disconnect
the battery ground cable.
...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation
Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside the
35R clutch.
...
Description
Burglar Alarm SystemThe burglar alarm system is armed automatically after the
doors, hood, and trunk lid are closed and locked.
The system is set off when any of these things occur:
•
A ...