Kia Optima: Check Engine (Malfunction Indicator) Light
This indicator light
is part of the On Board Diagnostic System which monitors various emission control
system components. If this light illuminates while driving, it indicates that a
potential problem has been detected somewhere in the emission control system.
Generally, your vehicle will continue to be driveable and will not need towing, but have the system checked by an Authorized Kia Dealer or other competent repair shop as soon as possible.
CAUTION
- Prolonged driving with the On Board Diagnostic System Malfunction Indicator
Light (
) illuminated may cause damage
to the emission control systems which could effect driveability and/or fuel
economy. - If the On Board Diagnostic System Malfunction Indicator Light ()
begins to flash ON and OFF, potential catalytic converter damage is possible
which could result in loss of engine power. Have the On Board Diagnostic System
inspected as soon as possible by an Authorized Kia Dealer or other competent
repair shop.
✽ NOTICE
A loose fuel filler cap may cause the On Board Diagnostic System Malfunction
Indicator Light () in the instrument
panel to illuminate unnecessarily. Always make sure that the fuel
Low Fuel Level warning
This warning light indicates
the fuel tank is near empty. The warning light will come on when the fuel level
has dropped to about 2.2 US gal. (8.5 liters). Refuel as soon as possible. ...
Key Reminder Warning Chime
If the driver’s door is opened and the ignition key is left in the ignition switch,
the key reminder warning chime will sound. This is to remind you to remove your
keys from the ignition before yo ...
See also:
Installation of a Mobile Two-Way Radio System
If a mobile two-way radio system is installed improperly, or if an excessively
powerful type of system is used, other electronic systems may be adversely affected.
To avoid damage to your vehicle, ...
Removal
Pressure Side Impact Sensor
•
Removal of the airbag
must be performed according to the precautions/pr ...
Measuring Body Dimensions
1.
Basically, all measurements
in this manual are taken with a tracking gauge.
2.
When a measuring tape is
used, check to be sure there is no elongation, twis ...