It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect.
The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.Rear Seat Belt. Repair procedures
Replacement
Rear Seat Belt Replacement
•
When installing the belt,
make sure not to damage the retractor.
...
Trunk Room Light Bulb Replacement
1. Remove the trunk room lamp cover using flat blade screw driver.
2. After replacement of bulb, install the cover. ...
Inspection
Speedometer
1.
Adjust the pressure of the tires
to the specified level.
2.
Drive the vehicle onto a speedometer
tester. Use wheel chocks (A) as appropriate.
...