Kia Optima: Bright-Metal Maintenance
- To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
- To protect the surfaces of bright-metal parts from corrosion, apply a coating of wax or chrome preservative and polish to a high luster.
- During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Finish Damage Repair
Deep scratches or stone chips in the painted surface must be repaired promptly.
Exposed metal will quickly rust and may develop into a major repair expense.
✽ NOTICE
If your vehicle is dama ...
Underbody Maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fu ...
See also:
Installation
1.
Install the cluster to the cluster
housing.
2.
Install the cluster fascia panel
and crash pad side garnish [LH].
3.
Install the crash pad lower pan ...
Rear Seat. Repair procedures
Replacement
Seat Assembly Replacement
1.
Remove the rear seat cushion
(A).
2.
Disconnect the rear seat heater
connectors (A).
3.
After ...
RCV Control Solenoid Valve. Specifications
Specification
Item
Specification
Coil Resistance (Ω)
28.3 ~ 31.1 [20°C(68°F)]
...
Copyright © www.kiopman.com 2024