Kia Optima: Body Control Module (BCM). Repair procedures

Function

Wiper Control Washer Control Coupled With Wiper 1. Under IGN2 = ON, wiper LOW relay is turned ON after T2 from Washer switch ON if washer switch is ON for T1 and wipe ...

Trouble Diagnostics When Using GDS

1. The body control module can diagnose by using the GDS more quickly.The BCM communicates with the GDS and then reads the input/output value and drives the actuator. ...

See also:

Tilt Steering
To change the steering wheel angle, pull up on the lock release (located beneath the steering column), adjust the steering wheel to the desired angle, then release the lock-release to lock the s ...

Opening the Hood
1. Pull the release lever on the lower left side of the instrument panel to unlatch the hood. 2. Go to the front of the vehicle, slightly raise the hood, pull up on the secondary latch and li ...

Storing positions into memory using the buttons on the door
Storing driver’s seat positions 1. Shift the shift lever into P while the ignition switch is ON. 2. Adjust the driver seat to position comfortable for the driver. 3. Press SET button on the contr ...