Replacement
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the crash pad and heater
blower unit. (Refer to HA group-heater unit) |
3. | Remove the heater blower unit from crash pad. (Refer to HA group - "Heater Unit") |
4. | Remove the blower unit (A) from
the heater unit after loosening a mounting bolt and screws.
|
5. | Installation is the reverse order of removal. |
Curtain Airbag (CAB) Module. Description and Operation
Description
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver
and passenger from danger when side crash occurs. The SRSCM determines deployment
of curtain airb ...
Power Seat Motor. Repair procedures
Inspection
Power Seat Motor
1.
Disconnect the connectors for
each motor.A : Front height motor
B : Slide motorC : Rear height motor
D : Recline motorE : Lumber support motor
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the resonator and the air intake hose (Refer
to “Intake And Exhaust ...