The automatic climate control system is controlled by simply setting the desired temperature.
The Full Automatic Temperature Control (FATC) system automatically controls the heating and cooling system as follows;
1. Press the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by setting the temperature.
2. Set the temperature control knob to the desired temperature.
If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously.
3. To turn the automatic operation off, select any button or switch of the following:
• Mode selection button
• Air conditioning button
• Front windshield defroster
button
• Air intake control button
• Fan speed control switch
The selected function will be controlled manually while other functions operate automatically.
For your convenience and to improve the effectiveness of the climate control, use the AUTO button and set the temperature to 23°C (73°F).
✽ NOTICE
Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.
Components
and Components Location
Components Location
1. PCV Valve
2. Canister
3. Purge Control Solenoid Valve (PCSV)
4. Fuel Tank Pressure Sensor (FTPS)
5. Canister Close Valve (CCV)
6. Fuel L ...
BLUETOOTH® PHONE OPERATION
1. VOLUME button : Raises or lowers speaker volume. 2.
button : Activates voice recognition.
3. button : Places and transfers calls.
4. button : Ends calls or cancels functions. ...
Output Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40~150)) -40~302
Air gap(mm)in.
(0.55~1) 0.0217~0.0394
...