Kia Optima: Auto light control
To operate the auto light, turn the knob on the end of the control lever.
If you set the knob to “AUTO” the tail lights and headlights will be turned on or off automatically according to the outside lighting conditions.
High-Beam Operation
To turn on the high-beam headlights, push the lever away from you. Pull it back for low beams.
The high-beam indicator will light when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
Lighting Control
The light switch has a Headlight and a Parklight position.
To turn the lights on, twist the knob on the end of the control lever.
Parklight position ()
When the light switch is in the parklight p ...
Flashing Headlights
To flash the headlights, pull the lever toward you. It will return to the normal
position when released. The headlight switch does not need to be on to use this
flashing feature. ...
See also:
Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink button. Do not release until step 4 has
been completed.
2. ...
Radial-ply tires
Radial-ply tires provide improved
tread life, road hazard resistance and
smoother high speed ride. The radial-
ply tires used on this vehicle are of
belted construction, and are selected
to ...
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position. 2. Select desired temperature.
3. Select the or
position. 4. The outside (fresh) air
will be selected automatically.
...