Kia Optima: Auto Head Lamp Leveling Unit. Repair procedures

Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. Microprocessor calculates necessary ...

Inspection

1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lamps changes smoothly when the head lamp leve ...

See also:

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation ...

Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening 2 screws. ...

Checking the coolant level
WARNING Removing radiator cap Never attempt to remove the radiator cap while the engine is operating or hot. Doing so might lead to cooling system and engine damage. Also, hot ...