Transmitter Code Registration (Using Code Saver)
1.
Open Door.
2.
Connect POWER (B+) and GND, signal
line of Code Saver.
3.
If connection is normal, signal
line is activated and RED LED turns ON.
...
Power Window Motor. Repair procedures
Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
2.
Disconnect the connector from
...
How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around
your city. They are intercepted by the radio antenna on your vehicle. This signal
is then received by the radio and s ...