Kia Optima: Anchor Pretensioner (APT). Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Front seat belt anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent the driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.
|
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes.
3.
Install the seat belt ...
See also:
Temperature Control Actuator. Description and Operation
Description
1.
Heater unit includes mode control
actuator and temperature control actuator.
2.
Temperature control actuator
is located at the heater unit. It regulat ...
Inspection
Armature Inspection
And Test
1.
Remove the starter.
2.
Disassemble the starter as shown at the beginning
of this procedure.
...
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replac ...
Copyright © www.kiopman.com 2024