Description
1. | The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperatures. |
2. | The sensor output will be used
for discharge temperature control, temperature regulation door control,
blower motor level control, mix mode control and in-car humidity control.
|
Replacement
1.
Turn ignition switch OFF.
2.
Disconnect the negative (-) battery
cable.
3.
Disconnect the TCM connector
(A).
4.
Re ...
Before starting
Close and lock all doors.
Position the seat so that all controls are easily reached.
Adjust the inside and outside rearview mirrors.
Be sure that all lights work.
Check all gauges.
Check ...
Fuse Replacement
WARNING - Fuse Replacement
Never replace a fuse with anything but another fuse of the same rating.
A higher capacity fuse could cause damage and possibly a fire.
Never install a wire inst ...