Adjust Hood
1. | After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. |
2. | Adjust the hood height by turning the hood overslam bumpers (C). |
3. | After loosening the hood latch
(D) mounting bolts, adjust the latch by moving it up or down, or right or
left.
|
Function
Function RequirementsThe BCM controls IPS and relay on the SJB. For example,
if BCM requests head lamp low beam control, then BCM requests related lamp control
at one time.
Signal Flow DiagramThi ...
Trailing Arm. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
WARNING - Rear visibility
Do not place objects in the rear seat ...