Stop lamp switch clearance adjustment |
1. | Disconnect the stop lamp switch
connector (B).
|
2. | Release locking plate by pushing
the hooks (B) carefully, and then pull the locking plate (A) as indicated
by the arrow (C).
|
3. | Turn stop lamp switch 45° counterclockwise
and remove it.
|
4. | Fix the brake pedal arm and insert
fully the stop lamp switch as hiding contact part.
|
5. | After inserting, turn the stop
switch (A) 45° clockwise, and then assemble locking plate (B) by pushing.
|
6. | Confirm the gap between stop
lamp switch and bracket.
|
7. | Connect the stop lamp switch connector. |
Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of
your vehicle during the day. DRL can be helpful in many different driving conditions,
and it is especially helpful af ...
Inspection
1.
Rack bar
A.
Check the rack gear for
damage.
B.
Check the rack bar for
bend and deformation.
2.
...
Disassembly
•
Do not disassemble the
BJ assembly.
•
Special grease must be
applied to the d ...