Kia Optima: Accelerator Position Sensor (APS). Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. The second sensor monitors the first sensor and its output voltage is half of the first one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the diagnostic system judges that it is abnormal.
Installation
1.
Installation is reverse of removal.
...
Accelerator Position Sensor (APS). Specifications
Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
...
See also:
Withheld alarm
When the alarm is armed, the alarm will not sound if the trunk lid is opened
with either the key or the transmitter.
However, if the trunk lid is not opened completely within two seconds after unlo ...
Rear Body. Body Repair
Side outer panel rear corner
Rear package tray trim mounting hole
(Ø10)
Rear transverse trim mo ...
Outside Rearview Mirrors
Be sure to adjust mirror angles before driving.
WARNING - Convex Mirror
• The right outside rearview mirror is convex. Objects seen in the mirror are
closer than they appear. When changing la ...
Copyright © www.kiopman.com 2024