To open a window, press down on the front portion of the power window switch. To close a window, pull up on the front portion of the power window switch.
✽ NOTICE
The driver’s door window “LOCK” switch must be in the OFF position (not depressed) to operate the passenger door windows.
Description
and Operation
Description
Ignition timing is controlled by the electronic control ignition
timing system. The standard reference ignition timing data for the engine operating
conditions are preprogrammed in ...
Installation
1.
Install the power window switch
module.
2.
Install the door trim panel after
reconnecting the relevant connectors
...
Power Door Mirror Actuator. Repair procedures
Inspection
1.
Remove the front door quadrant
delta cover.(Refer to the BD group - "Front door")
2.
Disconnect the power door mirror
connector from the ...