Kia Optima: 26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]▷ Control type : Normal low type
|
Control Pressure kpa(kgf/cm², psi) |
9.81~500.14(0.1~5.1, 1.42~72.54) |
|
Current value(mA) |
50~850 |
| Internal
resistance(Ω) |
5.1 |
26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable
force solenoid valve directly controls the hydraulic pressure inside the 26 brake.
...
26 Brake Control Solenoid Valve(26/B_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Description and Operation
Description
Exhaust emissions (CO, HC, NOx) are controlled by a combination
of engine modifications and the addition of special control components.Modifications to the combustion chamber, intake m ...
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the lens trunk trim.
(Refer to the BD group - "Trunk")
3.
Replace the bulb (A) ...
Battery replacement
When replacement is necessary, use the following procedure.
1. Using a screwdriver, loosen the screw on the backside of the transmitter then
use a thin tool to pry open the transmitter.
2. Disas ...
Copyright © www.kiopman.com 2024