Kia Optima: 26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake.
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
9.81~500.14(0.1~5.1, 1.42~72.54)
Curren ...
See also:
Installing a Child Restraint System in the Front Seat and Rear Outboard Seats
1. Place the child restraint system in the seat and route the lap/shoulder belt
around or through the restraint, following the restraint manufacturer’s instructions.
Be sure the safety belt webb ...
Moving the Front Seat Forward and Backward
To move the seat forward or backward, pull up on the lever under the front edge
of the seat cushion, slide the seat to the desired position, and release the lever.
To ensure the seat is locked i ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is found, repa ...