Kia Optima: Tire Repair procedures - Tires/Wheels - Suspension SystemKia Optima: Tire Repair procedures

Tire wear
1.
Measure the tread depth of the tires.

Tread depth [limit] : 1.6 mm (0.063 in.)

2.
If the remaining tread depth (A) is less than the limit, replace the tire.
   
   
When the tread depth of the tires is less than 1.6 mm(0.063 in.), the wear indicators (B) will appear.


Tires/Wheels
...

Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, fin ...

See also:

EPB connector input/output
Pin No. Function Pin No. Function 1 - 21 Gear switch 2 - 22 ...

Power Door Lock Switch Repair procedures
Inspection Driver Door Lock Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") 3. Disconnect t ...

Installation
1. Installation is reverse of removal. ...

Copyright © www.kiopman.com 2020