Kia Optima: Tire Pressure Monitoring System
- Components and Components Location
- Description and Operation
- TPMS Sensor Description and Operation
- TPMS Sensor Repair procedures
- TPMS Receiver Description and Operation
- TPMS Receiver Schematic Diagrams
- TPMS Receiver Description and Operation
- TPMS Receiver Repair procedures
Alignment Repair procedures
Front wheel alignment
When using a commercially available computerized wheel
alignment equipment to inspect the front wheel alignment, always
position the vehicle o ...
Components and Components Location
Components Location
1. Receiver2. TPMS sensor (FL)3. TPMS sensor (RL)4. TPMS sensor (RR)5. TPMS sensor (FR)
...
See also:
Climate Control Air Filter Repair procedures
Replacement
1.
Disconnect the damper (B) from the glove box (A).Remove the glove box lift (C).
2.
Remove the filter cover with pushing the knob.
3.
Replace the air filter (B), install it ...
Special Service Tools
Personal Protective Equipment
NameIllustrationDescriptionInsulation gloveUsed when inspecting or working on the high voltage components[Insulation performance : 1000V / 300A or above]Insulation s ...
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Copyright © www.kiopman.com 2020