Kia Optima: Steering Gear box Components and Components Location
| Components |
| 1. Tie rod end 2. Lock nut 3. Bellows 4. Bellows band 5. Tie rod | 6. Rack bar 7. Dust packing 8. Dust cap 9. Oil seal 10. Pinion plug | 11. Pinion assembly 12. Yoke plug 13. Yoke spring 14. Support yoke assembly 15. Rack housing |
Steering Column and Shaft Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
...
Steering Gear box Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub ...
See also:
Repair procedures
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group).
When removing the fuel pump re ...
Hazard warning flasher
Type A
Type B
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the ...
Timing Chain Components and Components Location
Components
1. Intake camshaft2. Exhaust camshaft3. Intake CVVT assembly4. Exhaust CVVT assembly5. Timing chain6. Timing chain guide7. Timing chain tensioner arm8. Timing chain tensioner9. Timing ...
Copyright www.kiopman.com 2021