Kia Optima: Start/Stop Button Repair procedures - Button Engine Start System - Body Electrical SystemKia Optima: Start/Stop Button Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the crash pad side cover (A).
3.
After loosening the mounting screws, then remove the crash pad lower panel (A).
4.
Disconnect the crash pad lower switch connectors (A), diagnosis connector (B), crash pad under lamp connector (C).
[LH]


5.
Disconnect the start/stop button connector (D).
[RH]


6.
Remove the start/stop button (A) from the lower panel after loosening the mounting screws.


7.
Remove the start/stop (A) after loosening the mounting screws.

Installation


Installation
1.
Install the start/stop button.
2.
Install the crash pad lower panel.
Start/Stop Button Components and Components Location
Component ...

Ignition Switch Assembly
...

See also:

Air cleaner
Filter replacement It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. ...

Canister Close Valve (CCV) Description and Operation
Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage dete ...

Rocking the Vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth betwe ...

Copyright © www.kiopman.com 2020