Kia Optima: SS-B Solenoid Valve (ON/OFF) Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Optima: SS-B Solenoid Valve (ON/OFF) Description and Operation

Description
The SS-B solenoid valve is attached to the valve body and is an SS-B solenoid valve that is used to change gears.


SS-A Solenoid Valve (ON/OFF) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) D ...

SS-B Solenoid Valve (ON/OFF) Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B) Control type : Normal low type Control pressure kpa(kgf/cm?, psi)490.33 (5.0, 71.12) Internal resistance(?)10 ~ 11 ...

See also:

Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, Preventing glare from the light. The forward facing sensor detects brightnes ...

Engine Oil Pressure Warning
This warning light indicates the engine oil pressure is low. If the warning light comes on while driving: 1. Drive safely to the side of the road and stop. 2. With the engine off, check the engin ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perfo ...

Copyright © www.kiopman.com 2020