Kia Optima: Specifications - Engine Electrical SystemKia Optima: Specifications

Specification
Ignition System
Items
Specification
Ignition coil
Primary resistance
0.62 ± 10 % (?)
Secondary resistance
7.0 ± 15 % (k?)
Spark plugs
Type
FXU16HR11
Gap
1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

Charging System
Items
Specification
Auxiliary 12V battery
Type
54-28GR
Cold cranking amperage [at -18°C(-0.4°F)]
600A
Reserve capacity
113min
Specific gravity [at 20°C(68°F)]
1.28 ± 0.01

   
   
COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C(80.1°F).
   
   


High Voltage Shut-off Procedures
High Voltage Shut-off Procedures     Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage sys ...

Special Service Tools
Personal Protective Equipment NameIllustrationDescriptionInsulation gloveUsed when inspecting or working on the high voltage components[Insulation performance : 1000V / 300A or above]Insulation s ...

See also:

Inspection
Front Seat Heater Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover.(Refer to the BD group - "Console") ...

To defrost outside windshield
1. Set the mode selection switch to the position. When you select position, the system automatically turns on the outside (fresh) air mode. 2. Set the temperature control knob to the extreme ...

Components and Components Location
Component Location 1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low)4. Clock spring5. Horn (High) ...

Copyright www.kiopman.com 2020