Kia Optima: Special Service Tools - Body Electrical SystemKia Optima: Special Service Tools

Special Service Tools
Tool Name / Number
Illustration
Description
RKE Battery Checker
09954-2P100

Personal Protective Equipment

Measuring the RKE battery
voltage


Personal Protective Equipment
Name
Illustration
Description
Insulation glove

the high voltage components with insulation sheet to prevent people who

Used when inspecting or working on the high voltage components
[Insulation performance : 1000V / 300A or above]
Insulation shoes

the high voltage components with insulation sheet to prevent people who

Used when inspecting or working on the high voltage components
Insulation clothes

the high voltage components with insulation sheet to prevent people who

Insulation helmet

the high voltage components with insulation sheet to prevent people who

Safety glasses

the high voltage components with insulation sheet to prevent people who

Used in the case below
• During Removal & installation or inspection of the high voltage battery terminals or wiring, which spark might happen.
• During working on the high voltage battery pack assembly.
Face shield

the high voltage components with insulation sheet to prevent people who

Insulation mat

the high voltage components with insulation sheet to prevent people who

Putting the removed high voltage components on the insulation mat to prevent safety accidents.
Insulation sheet

the high voltage components with insulation sheet to prevent people who

Covering
the high voltage components with insulation sheet to prevent people who don’t wear the personal protective equipment from safety accidents.


General Information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and clean and tight c ...

Audio
...

See also:

Installation
Install the component with the specified torques. Note that internal damag ...

Front Strut Assembly Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolt ...

Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (B) and air cleaner assembly (A). 3. Disconn ...

Copyright www.kiopman.com 2021