Kia Optima: Special Service Tools
| Special Service Tools |
| Tool(Number and Name) | Illustration | Use |
| Deployment tool 0957A-34100A |
| Airbag deployment tool. |
| Deployment adapter 0957A-3Q100 |
| Use with deployment tool. (DAB, CAB, BPT, APT) |
| Deployment adapter 0957A-2E110 |
| Use with deployment tool. (PAB) |
| Deployment adapter 0957A-3F100 |
| Use with deployment tool. (SAB) |
| Dummy 0957A-38200 |
| Simulator to check the resistance of each wiring harness. |
| Dummy adapter 0957A-2E100 |
| Use with dummy (PAB) |
| Dummy adapter 0957A-3F000 |
| Use with dummy (SAB) |
| Dummy adapter 0957A-2G000 |
| Use with dummy (DAB, CAB, BPT, APT) |
DAB : Driver Airbag
PAB : Passenger Airbag
SAB : Side Airbag
CAB : Curtain Airbag
BPT : Seat Belt Pretensioner
APT : Anchor Pretensioner
| Personal Protective Equipment |
| Name | Illustration | Description |
| Insulation glove |
| Used when inspecting or working on the high voltage components [Insulation performance : 1000V / 300A or above] |
| Insulation shoes |
| Used when inspecting or working on the high voltage components |
| Insulation clothes |
| |
| Insulation helmet |
| |
| Safety glasses |
| Used in the case below • During Removal & installation or inspection of the high voltage battery terminals or wiring, which spark might happen. • During working on the high voltage battery pack assembly. |
| Face shield |
| |
| Insulation mat |
| Putting the removed high voltage components on the insulation mat to prevent safety accidents. |
| Insulation sheet |
| Covering
the high voltage components with insulation sheet to prevent people who don’t wear the personal protective equipment from safety accidents. |
Specifications
Specification
ItemResistance (?)Driver Airbag (DAB)1.88 ~ 5.8Passenger Airbag (PAB)1.88 ~ 5.8Side Airbag (SAB)1.88 ~ 5.8Curtain Airbag (CAB)1.88 ~ 5.8Seat Belt Pretensioner (BPT)1.88 ~ 5.8Anchor ...
General Information
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag system service.
Observe the instructions described in this manual, or the airbags c ...
See also:
Power Seat Motor Repair procedures
Inspection
Power Seat Motor
1.
Disconnect the connectors for each motor.
A : Front height motor
B : Slide motor
C : Rear height motor
D : Recline motor
E : Lumber support motor
2.
With ...
Blind Spot Detection Switch Components and Components Location
Component
...
26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure to the 26 brake.
...
Copyright © www.kiopman.com 2021