Kia Optima: Special Service Tools - Emission Control SystemKia Optima: Special Service Tools

Personal Protective Equipment
Name
Illustration
Description
Insulation glove

the high voltage components with insulation sheet to prevent people who

Used when inspecting or working on the high voltage components
[Insulation performance : 1000V / 300A or above]
Insulation shoes

the high voltage components with insulation sheet to prevent people who

Used when inspecting or working on the high voltage components
Insulation clothes

the high voltage components with insulation sheet to prevent people who

Insulation helmet

the high voltage components with insulation sheet to prevent people who

Safety glasses

the high voltage components with insulation sheet to prevent people who

Used in the case below
• During Removal & installation or inspection of the high voltage battery terminals or wiring, which spark might happen.
• During working on the high voltage battery pack assembly.
Face shield

the high voltage components with insulation sheet to prevent people who

Insulation mat

the high voltage components with insulation sheet to prevent people who

Putting the removed high voltage components on the insulation mat to prevent safety accidents.
Insulation sheet

the high voltage components with insulation sheet to prevent people who

Covering
the high voltage components with insulation sheet to prevent people who don’t wear the personal protective equipment from safety accidents.


Schematic Diagrams
Schematic Diagram ...

Troubleshooting
Troubleshooting SymptomSuspect areaEngine will not start or struggle to startVapor hose damaged or disconnectedEngine struggles to startMalfunction of the Purge Control Solenoid ValveRough idle o ...

See also:

Precautions
✽ NOTICE The transmitter (or smart key) will not work if any of following occurs: The ignition key is in the ignition switch. You exceed the operating distance limit (about 30 m [90 feet ...

Adjustment
Adjust Hood 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the ...

Function
Wiper Control Washer Control Coupled With Wiper 1. Under IGN2 = ON, wiper LOW relay is turned ON after T2 from Washer switch ON if washer switch is ON for T1 and wipe ...

Copyright www.kiopman.com 2020