Kia Optima: Shift Lever Components and Components Location - Automatic Transaxle Control System - Automatic Transaxle SystemKia Optima: Shift Lever Components and Components Location

Components


1. Shift lever assembly
2. Shift cable retainer
3. Shift cable assembly
4. "P" position switch
5. Manual mode switch housing
6. Shift lock solenoid

Inhibitor Switch Repair procedures
Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Insp ...

Shift Lever Repair procedures
Removal 1. Disconnect the 12V battery negative (-) cable. 2. Remove the knob (A) and boots (B) by pulling the direction of arrow after removing the boots from the console upper cover. 3. ...

See also:

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Accelerator Position Sensor (APS) Specifications
Specification AcceleratorPositionOutput Voltage (V)APS1APS2C.T0.7 ~ 0.80.29 ~ 0.46W.O.T3.85 ~ 4.351.93 ~ 2.18 ...

Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

Copyright © www.kiopman.com 2021