Kia Optima: Seat Belt Buckle Switch (BS) Description and Operation - SRSCM - RestraintKia Optima: Seat Belt Buckle Switch (BS) Description and Operation

Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.
Seat Track Position Sensor (STPS) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to BD group) 3. Loosen the two STPS s ...

Seat Belt Buckle Switch (BS) Components and Components Location
Components ...

See also:

Inspection
1. Check the strut bearing for wear and damage. 2. Check the spring upper and lower seat for damage and deterioration. 3. Compress and extend the pist ...

Speakers Repair procedures
Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector ...

General Safety Information and Caution
Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a ser ...

Copyright © www.kiopman.com 2021