Kia Optima: Repair procedures - Crankcase Emission Control System - Emission Control SystemKia Optima: Repair procedures

Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.
   
   
The plunger inside the PCV valve will move back and forth based on the vacuum.


4.
If the vacuum is not felt inspect PCV operation, if operating correctly clean or replace the vapor hose.
Schematic Diagrams
Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

See also:

Inspection
1. Rack bar A. Check the rack gear for damage. B. Check the rack bar for bend and deformation. 2. ...

Side Airbag (SAB) Module. Description and Operation
Description The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by ...

Brake Pedal Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad) 3. ...

Copyright © www.kiopman.com 2020