Kia Optima: Rear Upper Arm Repair procedures
| Replacement |
| 1. |
Remove the rear wheel & tire.
|
| 2. |
Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle.
|
| 3. |
Loosen the bolt & nut and then remove the rear upper arm (A) from the sub frame.
|
| 4. |
Installation is the reverse of removal.
|
| Inspection |
| 1. |
Check the bushing for wear and deterioration. |
| 2. |
Check the rear lower arm for deformation. |
| 3. |
Check the coil spring and spring pad for deterioration and deformation. |
| 4. |
Check for all bolts and nut. |
Rear Shock Absorber Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts wh ...
Rear Lower Arm Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts wh ...
See also:
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has the capability
to cruise, coast, accel ...
Troubleshooting
Trouble Symptom Charts
Trouble Symptom 1
Trouble Symptom 2
Trouble symptomProbable causeRemedyThe set vehicle speed varies greatly upward or downward"Surging" (repeated alternating accelerati ...
Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure
as follows. Compare the system condition with normal condition in the table below
and i ...
Copyright © www.kiopman.com 2020