Kia Optima: Rear Suspension System - Suspension SystemKia Optima: Rear Suspension System

Front Cross Member Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft)     Be careful not to damage to the hub bolts ...

Components and Components Location
Components Location 1. Sub frame2. Assist arm3. Trailing arm4. Rear disc5. Rear upper arm6. Rear shock absorber7. Coil spring ...

See also:

Ambient Sensor Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing o ...

Heater hose pump Repair procedures
Inspection 1. Connect the battery voltage and check the heater hose pump motor rotation. 1. +2. - 2. If the heater hose pump voltage is not operated well, substitute with a known-good h ...

Safety Belt Warning
As a reminder to the driver and passenger, safety belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON. If the driver's lap/shoulder belt is not ...

Copyright © www.kiopman.com 2020